Rear axle unit - removal and refitting
Removal
1 Proceed as described in the previous Section, paragraphs 1 to 8 inclusive.
2 Referring to Section 13, disconnect the shock absorber on each side at its lower end.
3 The axle tube and coil spring assemblies can now be lowered and withdrawn from theunderside of the vehicle. Take care not to snag the brake hydraulic lines when removing.
Refitting
4 Refitting is a direct reversal of the removal procedure.
5 Reconnect the shock absorbers at their lower mountings.
6 Note that the special remarks made in paragraph 12 of the previous Section also apply when refitting the axle unit.