Oil filter and pump - removal and refitting
Removal
1 The oil pump is externally mounted on the rearward facing side of the crankcase.
Oil filter and pump unit
2 Using a suitable removal tool (strap wrench or similar), unscrew and remove the oil filter cartridge and discard it.
3 Unscrew the three mounting bolts and withdraw the oil pump from the engine.
Removing the oil pump
4 Clean away the old gasket.
Refitting
5 If a new pump is being fitted, it should be primed with engine oil before installation. Do this by turning its shaft while filling it with clean engine oil.
6 Locate a new gasket on the pump mounting flange, insert the pump shaft and bolt the pump into position.
7 Oil the rubber sealing ring of a new filter and screw it into position on the pump, using hand pressure only, not the removal tool.
8 Top-up the engine oil to replenish any lost during the operations.