Radiator fan - removal and refitting
1 Disconnect the battery.
2 Pull the wiring connector plug from the rear of the fan motor and unclip the wiring from the fan cowl.
Radiator fan wiring connector (A) and wire retaining clip (B)
3 Unscrew the two fan retaining bolts from the base of the cowl, followed by the two upper bolts.
Radiator fan shroud securing bolts (arrowed)
4 Carefully lift the fan assembly from the engine compartment, taking care not to damage the radiator.
5 If removing the fan from the motor shaft, first mark their relative fitted positions to ensure correct realignment on assembly.
6 Extract the retaining clip and take off the fan from the motor shaft.
7 Unscrew the three nuts and separate the motor from the shroud.
8 Reassembly and refitting are reversals of the removal and dismantling operations.